[Amps] Anodised aluminum

[Charles Harpole]

Best lock washer in this application is the one with big teeth on the outside rim of the washer.... Second choice is big teeth on the inside of the hole.  The compression split lock washers are not usually turned upon tightening and thus cut very little into the underlying metal.
 
GL  Chas

Charles Harpole k4vud at hotmail.com 
 

> From: n4zed at comcast.net
> To: amps at contesting.com
> Date: Mon, 17 Oct 2011 20:41:35 -0400
> Subject: Re: [Amps] Anodised aluminum
> 
> Yes you can. I would use star or lock washers and NOT remove any anodize if 
> at all possible.
> 
> Ken
> N4zed
> 
> ----- Original Message ----- 
> From: "Robert Briggs" <vk3zl at bigpond.com>
> To: <amps at contesting.com>
> Sent: Monday, October 17, 2011 6:53 AM
> Subject: [Amps] Anodised aluminum
> 
> 
> >
> >
> > Hi all...I have just aquired a quantity of 2mm anodised aluminum sheet,,
> > I am wondering if I remove the anodising from all contact surfaces if I
> > can use this stock for rf deck cases...
> >
> > Cheers all....Bob..VK3ZL..
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps 
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps