[Amps] TL922 Fan

[Vic K2VCO]

Isaac,

Actually it is 100v, Japanese made. It is connected across only one of the primary 
windings. My amplifier is the non-US version, which operates on either 200, 220 or 240 VAC.

You can use a 120V fan if you wish. If you must use a 240V fan, you will have to change 
the circuit. This might be a little complicated by the circuit that keeps the fan running 
after turning the amplifier off.

On 4/13/2012 12:31 AM, 4Z4TL_IARC_300 wrote:
> Hello
> I am looking for a replacement fan  for the TL922.
>
> In case no original is found, what are its specs (220v I know...)?
> Any suggestions for an alternative?
>
> Thanks in advance, Isaac, 4Z1TL
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/