[Amps] Amps 3CX800's in a Alpha 374A
Peter Voelpel
df3kv at t-online.de
Tue Aug 21 14:27:36 EDT 2012
The GS-31B is much larger, only one will probably fit but you need to build
a new sub chassis for that tube.
Legal limit will not be possible at only 2.5KV and you need more drive.
I would not do that, the pair of 3CX800A7 will do much better in that amp.
73
Peter, DJ7WW
-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of chas
Sent: Dienstag, 21. August 2012 20:19
To: Carl; Amps Amps
Subject: Re: [Amps] Amps 3CX800's in a Alpha 374A
On 8/21/12 12:57 PM, Carl wrote:
> Its not plug and play since the 800 is much wider and will require one
> of the sockets being moved.
>
> The 76PA and 76CA 3 holers are easier since 2 of the 3 sockets will
> accomodate a 800.
>
> Filament transformer needs to be added in all cases.
>
> You will only get out the same power as a pair of 8874's since the HV
> is low and the transformer is not up to full bore for long in the 2
> hole models. A 3 holer will do 1800W +
>
> Carl KM1H
>
Carl
to clarify again... the amp is running a pair of 800s now.
I am interested in replacing them with a pair of GS-31Bs.
73
chas k5dam
--
PLEASE REMEMBER TO DELETE HEADERS!
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list