[Amps] Question for Alpha Owners

[Carl]

>From what Ive chased down those are built using Eimac supplied tooling but 
dont know about QC.
I have had Penta branded Chinese versions that worked identical to Eimacs in 
a LK-800NTC which is the No Tune version.
OTOH the anode cooler had a lot more fins but still cooled fine at 2500W for 
the 3 of them.

Carl
KM1H


----- Original Message ----- 
From: "W5CUL" <w5cul at sbcglobal.net>
To: <amps at contesting.com>
Sent: Friday, August 24, 2012 10:02 AM
Subject: [Amps] Question for Alpha Owners


>I am looking for comments from anyone who has field experience in using
> Machlett 3CX800A7 tubes in their Alpha compatible amplifiers.  Is the 
> input
> impedance different from that of the EIMAC version, any issues or
> differences with driving an amp with Machlett tubes installed.etc.  I saw 
> a
> similar question on the Alpha forum, but no answer as of yet.
>
>
>
> Thank you,
>
>
>
> Mike
>
> W5CUL
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5220 - Release Date: 08/23/12
>