[Amps] Solder flux

[Carl]

Liquid flux is not on everyones bench ( I have it) and is expensive, but its 
not as good as sucking or wicking out the old and starting with new. Doing 
as you suggested would get you fired at some companies.

Carl
KM1H



----- Original Message ----- 
From: "Mark K5AM" <k5am at zianet.com>
To: <amps at contesting.com>
Sent: Sunday, August 26, 2012 3:18 PM
Subject: [Amps] Solder flux


> At 2012-08-26 15:48, Carl wrote:
>>Many years of hard use might crystalize the solder at the switch and
>>elsewhere in RF paths, it should be removed and fresh solder flowed on.
>
>
>
> More easily, a drop of liquid flux, and reheating, will brighten up
> the connection.
>
> 73,
>
> Mark, K5AM
> www.zianet.com/k5am
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2437/5225 - Release Date: 08/26/12
>