[Amps] hf-2500

[Jim W7RY]

Bill

We already had this discussion on here about a year ago. But I 'm going to 
repeat it.

Alpha, Ameritron, Jerry K8RA, myself W7RY, and many others all use toroids 
with shorted turns on our "L" coil in a PI-L circuit.  It works just fine.

Do you mean that a shorted turn toroid for the PI network is not good?  Or 
are you making a general statement that they don't work at all in an 
amplifier?


73
Jim W7RY


-----Original Message----- 
From: Bill Turner
Sent: Wednesday, December 19, 2012 12:26 PM
To: Amps
Subject: Re: [Amps] hf-2500

ORIGINAL MESSAGE:
On Wed, 19 Dec 2012 17:15:03 +0000, K1TTT wrote:

>Agreed, that is why I have modified one to do only 40-10m... removing the
>80m and 160m coils from the toroid removes the shorted turns problem and
>makes it run very nicely doing rtty on 40m.

REPLY:
As David found out, shorted turns on a toroid or any iron core coil
are a no-no unless you do some very careful design and testing, which
Command obviously did not do. Shorted turns on an air core coil are
usually no problem. A word to the wise.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps