[Amps] 3CX400/3CX800 Socket

[Carl]

The plate clamp used is simply a push on big resistor type clamp and maded 
of plated steel. I tossed them in my 76PA as they were corroded from 
Carribean living at a contest station. Ive had many othe 8874 Alphas in here 
with similar corrosion and some appears to be caused just by the RF.  I cut 
some brass strips, drilled a few holes for a screw and wire connection and 
tighten enough so they make a good connection but not overtight.

Carl
KM1H


----- Original Message ----- 
From: "Charles Hedrick" <cchedrick at gmail.com>
To: <amps at contesting.com>
Sent: Monday, January 30, 2012 10:16 AM
Subject: [Amps] 3CX400/3CX800 Socket


> Good morning all,
> I  have and would like to add a third 8874 to my Alpha 76 but need a 
> socket
> and plate cap.  If anyone has these to part with, please let me know.
> Thanks,
> Cam
> WA4JKW
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1416 / Virus Database: 2109/4776 - Release Date: 01/30/12
>