[Amps] Filament Xfmr

[Jim W7RY]

I have not died in a house fire.

Your language is a little coarse isn't it?

And it works fine. I used and others are advised to use Teflon wire.

No go back into the hole you climbed out of!

73
Jim W7RY



-----Original Message----- 
From: Gudguyham at aol.com
Sent: Sunday, July 08, 2012 12:32 PM
To: manfred at ludens.cl ; amps at contesting.com
Subject: Re: [Amps] Filament Xfmr



In a message dated 7/8/2012 3:26:11 P.M. Eastern Daylight Time,
manfred at ludens.cl writes:

>  Should I be concerned with the wire size.


Rich Measures AG6K uses #22 wire on a 30A circuit to feed a pair of
3-500's.  He does this intentionally due to the voltage drop he  wants. 
Either
everyone who did this modification he suggests died in a  house fire in 
doing
so or they are just not coming forward to tell us it worked  OK for them.


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps