[Amps] Oscilloscope Purchase

[Randall, Randy]

I also have a Tek 465 and it works great.  I have another though less common scope the Philips/Fluke 3350A 60Mhz 100MS/s that is both an analog AND a digital scope.  It is convenient to use the measurement functionality of the digital then swap back to the real time analog.  I paid $80 for it at the Hamfest working.  Make sure that the one you get is working as there is NO support from Fluke on parts.

Randy


Randy E. Randall AB9GO
Network Engineer
UC Health
Randy.Randall at UCHealth.com
Phone 513-585-7146
Fax 513-585-7159

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On Behalf Of Melvin Nichols
Sent: Tuesday, June 26, 2012 8:04 PM
To: amps
Subject: [Amps] Oscilloscope Purchase

A little off topic, but I want to check the timing of my amp relays. I have been looking at purchasing a used scope for this and general repair on my equipment. I have been looking at a 2-channel, 100-200Mhz type. What would be a good model for this purpose?

Thanks, 73
Mel, NZ0O
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps

Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information.  Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.