[Amps] Gettering GU-74B's in-place with screen voltage?

Russ Williams hrd998cc at yahoo.com
Mon Mar 12 19:41:16 PDT 2012


Hi Jim.  I would be suggest not running positive screen voltage without the plate voltage present.  The screen could possibly be ruined by drawing excess current.  Someone please correct me if I am off base here.

Russ



________________________________
 From: Jim Barber <audioguy at q.com>
To: "Amps at contesting.com" <Amps at contesting.com> 
Sent: Sunday, March 11, 2012 10:47 PM
Subject: [Amps] Gettering GU-74B's in-place with screen voltage?
 
Is there any reason I shouldn't getter a set of GU-74B's in-place in the 
amp with blower air, filaments hot, and with grid and screen bias 
applied, but with the plate caps lifted? The amp in question is a QRO 
HF2500DX that appears to be virtually unused, but also appears to have 
been stored for an unknown amount of time.

Most of my experience is with metal-ceramic triodes (which "bang" after 
storage without gettering) and good-old beam pentodes like the 813, 
which don't, or at least haven't yet for me, at least. These (Russian) 
metal-ceramic tetrodes are undiscovered country, so I may be being 
over-cautious. Or not?

Thanks,
Jim N7CXI
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps


More information about the Amps mailing list