[Amps] Tubes vs. Solid State
Doug Ronald
doug at dougronald.com
Wed May 2 12:48:13 PDT 2012
COTS heat pipe vapor phase devices are sealed, closed loop systems which are
pre-evacuated at the time of manufacture so the volatile liquid which isn't
necessarily water, boils just above room temperature. There was an article
on them with application to amateur use in the July/August 2010 QEX by KD1K.
-Doug AE6SY
-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Pete Smith N4ZR
Sent: Wednesday, May 02, 2012 3:45 AM
To: Amps at contesting.com
Subject: Re: [Amps] Tubes vs. Solid State
Regarding vapor phase cooling, I had to smile when I read Dick's
suggestion to evacuate the cooling system to 1 PSIA, lowering the
boiling point to 100F. Seems like this would change everything - at the
cost of additional complexity, of course. Whoever would have thought we
might see ham amps with vacuum pumps?
73, Pete N4ZR
The World Contest Station Database, updated daily at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list