[Amps] plate voltage meter shunt

[Jim W7RY]

Yes they do. I used one in my Drake L4B. The stock string had an 
intermittently open resistor causing intermittent plate voltage reading.

73
Jim W7RY


-----Original Message----- 
From: Carl
Sent: Saturday, November 03, 2012 2:46 PM
To: Douglas Johnson ; AMPS
Subject: Re: [Amps] plate voltage meter shunt

Mouser carries Ohmite flatpak HV resistors; Ive been using them to replace
the old carbons in many amps.

Carl
KM1H


----- Original Message ----- 
From: "Douglas Johnson" <w9iix1 at yahoo.com>
To: "AMPS" <amps at contesting.com>
Sent: Saturday, November 03, 2012 5:15 PM
Subject: [Amps] plate voltage meter shunt


I am installing a meter to measure plate voltage 1-5000v@ 1a dc, the meter
has a 1ma fs rating. the serial resistance I have made up in the past has
been 3 watt metal film resistors in series. since they can only rated for
200v per resistor it takes many to do the job. Can some other resistor type
with a higher rating be used in a safe manner for this purpose?...tnx,
Doug,w9iix
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1427 / Virus Database: 2441/5371 - Release Date: 11/03/12


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps