[Amps] conductive grease for roller inductor

[Bill Fuqua]

I don't think the grease is conductive, It is that as long as it remains 
fluid the
high pressure contacts can poke thru it. If the grease was conductive it
would likely get hot and scorch the conductors since it would be have much
higher resistivity than the conductors.

73
Bill wa4lav


At 02:15 PM 11/21/2012 -0500, Ralph Young wrote:
>I have a Nye-Viking tuner with their home made roller inductor.   The roller
>has seized up on the shaft that guides it along the inductor.   They used
>some sort of conductive grease on the shaft and a few other places on the
>inductor assembly to improve contact.   Does anyone have a source for a
>conductive grease I can use on the roller once I get it all apart and freed
>up?
>
>Ralph  N4TG  ralry at chartertn.net
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps