[Amps] Question re GU-74B capability

[Carl]

Thats right, I forgot VK finally got elevated to a realistic power 
level....at least officially.

Carl
KM1H


----- Original Message ----- 
From: "Leigh Turner" <invertech at frontierisp.net.au>
To: <amps at contesting.com>
Sent: Tuesday, October 23, 2012 7:44 PM
Subject: Re: [Amps] Question re GU-74B capability


>
> Carl, VK land has a 1 kW power limit on the HF bands.
>
> However I would not use a single GU74B/4CX800A tube at more than 800W PEP.
> Run at that Po level or under, in SSB mode the damn tube lasts forever.
>
> Which is precisely what one would expect for a conservatively rated 
> Russian
> rugged mil-spec tube, i.e. practical experience matches expectations!
>
> Even at today's increasingly higher pricing compared to how cheap they 
> used
> to be, the GU74B still represents exceptional value and bang for buck.
>
> Leigh
> VK5KLT
>
>
> -----Original Message-----
> From: Carl [mailto:km1h at jeremy.mv.com]
> Sent: Tuesday, 23 October 2012 11:41 PM
> To: Jim W7RY; Leigh Turner; amps at contesting.com
> Subject: Re: [Amps] Question re GU-74B grid current
>
> ++snip++
>
> And Leigh, dont bother repeating ad nauseum how well your Emtron works 
> with
> the GU74B at the 400W VK power limit.
>
> Carl
> KM1H
>
>
>> -----Original Message----- 
>> From: Leigh Turner
>> Sent: Monday, October 22, 2012 7:49 PM
>> To: amps at contesting.com
>> Subject: Re: [Amps] Question re GU-74B grid current
>>
>>
>> Agreed Carl; but the labelling is unimportant. Quibbling over whether the
>> tube's plate dissipation is 600W or 800W is rather pointless. It's a
>> function of air supply CFM anyway as the cathode emission conservatively
>> supports an 800W rating.
>>
>> All ham Tx tubes are gradually going the way of the dodo bird; some just
>> faster than others.  Just look at the latest layoffs at CPI/Eimac's tube
>> division where the writing is on the wall as to what will happen next.
>>
>> Prudent owners of GU74B based amps would have stockpiled a few spare 
>> tubes
>> when they were dirt cheap. The Svetlana St Petersburg plant have
>> periodically made recent vintage new tube production batches to meet OEM
>> amp market demand so the GU74B/4CX800A will likely be around longer than
>> many others. There's nothing in need of improvement with the time-proven
>> GU74B tube design; if one wants a stronger/higher Po mid-sized tetrode
>> then go for the Chinese FU728F or the Chinese 4CX1000A clone.
>>
>> By way of interest, the GU74B tube in my oldest amp is now in its 10 year
>> of service and showing no signs of power degradation, so at that rate I
>> suspect my spares in the cupboard will probably see me out.
>>
>> Prudence and good sense would suggest one does not use a single GU74B at
>> greater than 700 to 800 Watts PEP output. A pair of them will do the US
>> legal limit effortlessly and with great longevity.
>>
>> Leigh
>>
>> VK5KLT
>>
>>
>>
>>  _____
>>
>> From: Carl [mailto:km1h at jeremy.mv.com]
>> Sent: Tuesday, 23 October 2012 12:30 PM
>> To: Carl; Leigh Turner; amps at contesting.com
>> Subject: Re: [Amps] Question re GU-74B grid current
>>
>>
>>
>> See correction below:
>>
>>
>>
>>
>>
>> ----- Original Message ----- 
>>
>> From: "Carl" < <mailto:km1h at jeremy.mv.com> km1h at jeremy.mv.com>
>>
>> To: "Leigh Turner" < <mailto:invertech at frontierisp.net.au>
>> invertech at frontierisp.net.au>; < <mailto:amps at contesting.com>
>> amps at contesting.com>
>> Sent: Monday, October 22, 2012 9:56 PM
>> Subject: Re: [Amps] Question re GU-74B grid current
>>
>>> Yeah sure. A 600W rated tube fraudently labled 800W to grab US dollars.
>>> At least ACOM has NOT erased the GU74B for a 4CX800A even tho running
>>> them just as hard.
>>>
>>> They will soon go the way of the dodo bird unless the Chinese copy and
>>> maybe improve it.
>>>
>>> Carl
>>> KM1H
>>>
>>>
>>>
>>> ----- Original Message ----- 
>>> From: "Leigh Turner" < <mailto:invertech at frontierisp.net.au>
>> invertech at frontierisp.net.au>
>>> To: < <mailto:amps at contesting.com> amps at contesting.com>
>>> Sent: Monday, October 22, 2012 9:28 PM
>>> Subject: Re: [Amps] Question re GU-74B grid current
>>>
>>>>
>>>> Yes, the ACOM-1000 and ACOM-2000A are two good examples of what good 
>>>> amp
>>>> designers can do with good tubes.  These GU74B tube based amplifier
>>>> products have been immensely successful for ACOM and others.
>>>>
>>>> Jim you are absolutely right to be interested in what amp builders are
>>>> actually getting and experiencing from these fine tubes, rather than
>>>> rely only on information gleaned from the translated GU74B Russian
>>>> data/spec sheets. Unlike the savvy folk, many are not aware of the full
>>>> picture in respect of how good these conservatively rated mil-spec 
>>>> tubes
>>>> actually are.
>>>>
>>>> Leigh
>>>> VK5KLT
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Carl
>>>> Sent: Tuesday, 23 October 2012 11:19 AM
>>>> To: Vic K2VCO;  <mailto:amps at contesting.com> amps at contesting.com
>>>> Subject: Re: [Amps] Question re GU-74B grid current
>>>>
>>>>
>>>> Thats being rather polite about it (-;
>>>>
>>>> Carl
>>>> KM1H
>>>>
>>>>
>>>>
>>>>> 71% overall efficiency is remarkable for a class AB1 amplifier.
>>>>
>>>>
>>>>> On 10/22/2012 12:10 PM, Val wrote:
>>>>>> Jim,
>>>>>>
>>>>>> ACOM1000 and ACOM2000A are without doubt the most popular amplifiers
>>>>>> based on GU74B. Many thousands of them are working under the 
>>>>>> following
>>>>>> conditions at1000W output:
>>>>>>
>>>>>> Plate  2350-2400V
>>>>>> Screen 340V
>>>>>> Anode current 510-580mA
>>>>>> Bias between -45 and -65V for 220 mA idling current (the EBS keeps 
>>>>>> the
>>>>>> bias between -65 and -75V for idling current of 70 mA when no RF
>>>>>> drive)
>>>>>> Normally the grid current is well below 10mA where the grid 
>>>>>> protection
>>>>>> trips.
>>>>>>
>>>>>> 73, Val LZ1VB
>>>>>>
>>>>>>
>>>>>> Could somebody advise me as to the resting plate current and 
>>>>>> operating
>>>>>> ctrl grid bias voltage they are using on a GU-74B (plate voltage is
>>>>>> 2500V, screen grid 300V)? Also, does the tube draw grid current? I
>>>>>> realize that in AB1, no grid current should be drawn, but the tube
>>>>>> characteristic curves predict about 15mA grid current at full output
>>>>>> (1000W output, 600mA anode current (per tube) and 250W resting
>>>>>> dissipation. I am interesting in what builders are actually getting,
>>>>>> and not information from data or spec sheets.
>>>>>>
>>>>>> Tnx and 73,
>>>>>>
>>>>>> Jim W8ZR
>>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1427 / Virus Database: 2441/5349 - Release Date: 10/23/12
>