[Amps] Henry 2K-2

[TexasRF at aol.com]

John, you might try disassembling the meter and look for the cause of an  
open circuit. Some times there is a small series resistor inside that can go  
open circuit.
 
I had a 10vdc meter recently that was repaired that way.
 
73,
Gerald K5GW
 
 
 
 
In a message dated 9/4/2012 6:51:13 P.M. Central Daylight Time,  
jasimmons at pinewooddata.com writes:

My amp  works great except the multimeter (left side) doesn't work. After 
take the  front panel off (try finding Bristol wrenches at the hardware 
store!) I  find the meter movement is open :(.

Anyone have a working original  Henry meter they would like to sell?

John  NI0K
_______________________________________________
Amps mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps