[Amps] Getting a blower out of the shack

[Martin A Flynn]

  * http://www.jamestowndistributors.com/userportal/show_product.do?pid=580
    - Hose
  * http://www.jamestowndistributors.com/userportal/show_product.do?pid=10376
    - Hose flange
  * http://www.jamestowndistributors.com/userportal/show_product.do?pid=589
    - Tunnel blower


If you are intent on converting square to round for the hose, just about 
anyone who does commercial air conditioning repair can have their "tin 
knocker" make up the transition section.

73 Martin Flynn
W2RWJ

On 4/9/2013 5:14 PM, Rick Stealey wrote:
> I need a means of converting the blower flange to a round hose, and the compliment of that at the amplifier.  I will run the 6 feet of hose through the sheetrock wall, and down through the sole plate into the basement, so the maximum hose diameter is 3.5 inches (it will go through a 2 X 4 sole plate).
> Any ideas where to get parts I would need?
>
> Rick  K2XT
>