[Amps] Dentron Clippertion L 1 ohm 1 watt.

[Carl]

Those resistors act as a HV fuse for when there is a DC short or a tube arcs 
over. Replace them with the same in carbon film.

Carl
KM1H


----- Original Message ----- 
From: "johne tds.net" <johne at tds.net>
To: <amps at contesting.com>
Sent: Friday, April 26, 2013 8:52 AM
Subject: [Amps] Dentron Clippertion L 1 ohm 1 watt.


> Working on this L that has more problems than I have ever seen.
> The 1 ohm 1 watt resistors are open that are by the rf choke.
> What is the current thinking as to what I should replace these with ?
> I do not have the 1 ohm resistors on hand.
> What should I use to temporarily install (In place of the 1 ohm) to check
> the rest of the amp.?
> The new 572B's check out ok on a tube tester. (Shorts)
> There is 2700 volts.
> Lucky I work for free... Put a lot of time in this one.
> Thanks de John K0CQW
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1432 / Virus Database: 3162/5774 - Release Date: 04/26/13
>