[Amps] L4B connector

[Dave Gow]

I believe it is the same as the plugs Johnson used on the Viking Valiant and
Ranger transmitters.  Replicas are available from several vendors that serve
users of these fine old AM transmitters.  I have several I bought on for
less than $10.  They are usually made from FT-243 crystal sockets. 
-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of
hrd998cc at yahoo.com
Sent: 08 August, 2013 8:37 PM
To: TexasRF at aol.com
Cc: amps at contesting.com
Subject: Re: [Amps] L4B connector

If you find one, Please let me know where you found it. I need one for my
L4B as well.

Thanks, Russ
KW6T

Sent from my iPhone

On Aug 7, 2013, at 1:00 PM, TexasRF at aol.com wrote:

> The new Harbach filter board is installed and working. Now looking for 
> a 2 pin connector to mate with the rear panel relay keying socket.
> 
> Any tips out there for a source?
> 
> Tanks/73,
> Gerald K5GW
> 
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps