[Amps] Glass Tape

[Mark Bitterlich]

So how about it Ed?  Those baluns turned to dust yet?

Interested minds want to know ......

wa3jpy
----- Original Message ----- 
From: "Carl" <km1h at jeremy.mv.com>
To: "Ed K0KL" <edk0kl at centurytel.net>; <amps at contesting.com>
Sent: Friday, July 26, 2013 4:44 PM
Subject: Re: [Amps] Glass Tape


> Glass tape usually turns to dust in UV sunlight.
>
> Carl
> KM1H
>
>
> ----- Original Message ----- 
> From: "Ed K0KL" <edk0kl at centurytel.net>
> To: <amps at contesting.com>
> Sent: Friday, July 26, 2013 3:35 PM
> Subject: [Amps] Glass Tape
>
>
>>I purchased a few rolls of glass tape when making my own baluns. It is 
>>both an
>> insulator and keeps the lacquer covering on the wire from chaffing on the 
>> ferrite
>> core.
>> Think fiberglass thread woven into a strip of fabric. In the case cited, 
>> I used it on
>> each end to make certain the resistor was centered on the screw.
>>
>> 73
>>
>> ed K0KL
>> _______________________________________________
> 07/26/13
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps