[Amps] Fw: SB200 on 6M

Karel Ebenstreit kebenstr at bmts.com
Mon Jun 3 19:10:35 EDT 2013


sorry forgot to cc.
Karel, VA3KO

----- Original Message ----- 
From: "Karel Ebenstreit" <kebenstr at bmts.com>
To: "Louis Parascondola" <gudguyham at aol.com>
Sent: Monday, June 03, 2013 7:05 PM
Subject: Re: [Amps] SB200 on 6M


> Why do not  you use famous Richard Measure, he designs and sell 
> suppressors for all makes.
> I am not sure if he is still around, I used him for my 4-1000A's and 
> 3-500's. some time ago.
> Karel , VA3KO
>
> ----- Original Message ----- 
> From: "Louis Parascondola" <gudguyham at aol.com>
> To: <km1h at jeremy.mv.com>; <jim.thom at telus.net>; <amps at contesting.com>
> Sent: Monday, June 03, 2013 6:57 PM
> Subject: Re: [Amps] SB200 on 6M
>
>
>> Knowing the right suppressor to use on an SB-200 conversion is what makes 
>> the bucks.
>>
>>
>> Having to use a high wattage resistor on such a small tube as a 572B 
>> means
>> you havent a clue about suppressor design, and simply use a generic brute
>> force method.
>>
>> Carl
>> KM1H
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Carl <km1h at jeremy.mv.com>
>> To: Jim Thomson <jim.thom at telus.net>; amps <amps at contesting.com>
>> Sent: Mon, Jun 3, 2013 5:56 pm
>> Subject: Re: [Amps] SB200 on 6M
>>
>>
>>>
>>> I'm converting a SB200 for 6M. What's the best configuration for the
>>> Anti-Parasitic Choke?
>>>
>>> Thanks
>>>
>>> - Paul
>>>
>>>
>>> ##  dunno.  BUT if the 2 watt carbon comp resistors heat up,  use more 
>>> of
>>> em in parallel,
>>> OR  use a small 7-10-15 watt  GLOBAR.    You can still buy the small
>>> globars  with wire leads
>>> out each end..still on their website.    Dunno what the min order is
>>> though.
>>>
>>> ##  On several 4-1000  HF amps from years ago, we would use five  of 
>>> those
>>> carbon comp resistors
>>> in parallel...end of heating problems.
>>>
>>> Jim  VE7RF
>>
>>
>> Having to use a high wattage resistor on such a small tube as a 572B 
>> means
>> you havent a clue about suppressor design, and simply use a generic brute
>> force method.
>>
>> Carl
>> KM1H
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
> 



More information about the Amps mailing list