[Amps] wiring diagramneeded for blower motor.

[John Farber]

I could use some sound advise before "firing up" a blower for use in my amp project. Attached is the motor face plate. There are three wires leaving the motor: white with a red stripe, white with a yellow stripe and white with a green stripe. Yellow to red measures 91 ohms, yellow o green measures 91 ohms, red to green measures 182 ohms. This tells me thee are two identical coils. T he motor- starting capacito r has  a red color dot on one terminal, no colo r spot on the other terminal.  My research on motor-starting capacitors leads me to believe I should connect the red motor wire to p hase1 of the mains wiring, the green motor wire to the phase 2 of the mains wiring and the common poin t of the two motor wires, the yellow wire should connect to the neu tral mains wire. Is this correct? 

Thanks, John, KG6I