[Amps] Amp Supply - Was: Using old amps on WARC query

[Carl]

Well, first thing is I goofed earlier and the Ameritron choke does fit in 
the Alpha 76 series. I had to take the cover off mine to check and it is in 
there!

I believe one forum member had his arcing to the blower and wound up putting 
a sleeve over it. I may have elongated the hole a bit for more clearance; 
its been awhile.
Too many amps too little time(-;

As far as Amp Suppy, the owners wife caught him dipping his wick to his 
secretary and she cleaned him out. He tried it also with wife #1 when he 
owned Dentron with the same results!. Now happy with #3 for a few decades+.

Carl
KM1H


----- Original Message ----- 
From: "Gary Smith" <Gary at ka1j.com>
To: <Amps at contesting.com>
Sent: Sunday, June 30, 2013 4:26 PM
Subject: Re: [Amps] Amp Supply - Was: Using old amps on WARC query


>
>> This blows up on 17M and the Ameritron wont fit. You will need
>> something
>> similar to what Amp Supply used or wind your own.
>
> I always thought the old Amp Supply made some nice components. I used
> their tuned input on the 3CX3000A7 amp I made back around 92 and it
> was wonderful. What ever happened to them? They didn't seem to make
> junk.
>
> Gary
> KA1J
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1432 / Virus Database: 3204/5951 - Release Date: 06/30/13
>