[Amps] Unique Henry Classic VHF console amps on QTH

[Roger (K8RI)]

On 3/11/2013 12:04 AM, Richard Solomon wrote:
> I have two large filters marked:
>
> Tempo 3002A Output Filter, and
> Tempo 3006A Output Filter

Are those the coiled up coax stubs? If so, I believe they were used with 
the table top 2002 and 2006 amps that used a single 3CX800.

73

Roger (K8RI)


>
> Given that I believe these were used on the Henry Amps now under discussion,
> I wonder just how clean those amps were ??
>
> 73, Dick, W1KSZ
>
> On Sun, Mar 10, 2013 at 7:26 PM, Donald Fox <taurusshoguy at yahoo.com> wrote:
>> Gents:
>> Just wanted to mention the 3002B 2 meter and 3006B 6 meter Classic consoles advertised on the QTH site.
>> Bill the owner who appears to be a very nice fellow had initally advertised them as using the 3CX1200A7 tube.
>> I contacted him, and questioned that as I felt that the 1200A7 would work at 50 mhz, but not at 144 mhz.
>>
>> He in turn sent me a photo of the 50 mhz deck which revealed that a 3CX1200Z7 is installed!  He seems to think that the 144 mhz console is the same.  Any thoughts about the Z7 working at 2m?
>>
>> At any rate, I have never seen these rare specimens that are indeed listed on Radiodan's Henry amp Legacy page.
>>
>> I would think he will get a pretty penny for both of them.
>>
>>                            Don  N8ECH
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>