[Amps] What is max grid current for YC-156 ??
Carl
km1h at jeremy.mv.com
Sun Mar 24 09:28:55 EDT 2013
Since the YC-156 has been referred to as having 3CX15000B7 internals then
the "never to exceed" 100ma average Ig on the spec sheet should hold true.
Carl
KM1H
----- Original Message -----
From: "Jim Thomson" <jim.thom at telus.net>
To: <amps at contesting.com>
Sent: Sunday, March 24, 2013 2:26 AM
Subject: [Amps] What is max grid current for YC-156 ??
>A buddy just fired up his hb YC-156 today. So far, so good. What is the
>max safe grid current for this tube ??
> It has both electronic grid and plate current protection..which can both
> be set to any value. The bias is also
> fully adjustable, so zsac can also be set to any value. The B+ can be
> set to 1/2 or full voltage.
>
> Before the drive is increased, and or B+ is doubled in value, we need to
> know asap, what max grid current is.
>
> Thanks in advance.
>
> Jim VE7RF
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1430 / Virus Database: 2641/5699 - Release Date: 03/23/13
>
More information about the Amps
mailing list