[Amps] 200-ohm tank and "un-un" in HF amp design
peter chadwick
g8on at fsmail.net
Tue Oct 22 13:26:50 EDT 2013
Jim,
The regulations state in level in the feedline. However, I could ask one of my friends at Industry Canada what they think.....
73
Peter G3RZP
========================================
Message Received: Oct 22 2013, 03:06 PM
From: "Jim Thomson" <jim.thom at telus.net>
To: amps at contesting.com
Cc:
Subject: [Amps] 200-ohm tank and "un-un" in HF amp design
Date: Mon, 21 Oct 2013 10:32:27 +0200
From: peter chadwick <g8on at fsmail.net>
To: amps at contesting.com
Subject: Re: [Amps] ?200-ohm tank and "un-un" in HF amp design?
>The touted higher harmonic suppression of a PI-L is mainly a myth.....a plane jane PI is more than ample for harmonic suppression.<
As a Class AB stage has a second harmonic component of plate current only 6dB down on the fundamental, what sort of Q do you run in the pi network to get the extra 37dB of suppression needed to meet the FCC regulations or the extra 44dB needed elsewhere?
73
Peter G3RZP
## ameritron uses a simple PI net on 40-10m on their bigger amps...and it easily meets the 44 db down FCC requirements. Ameritron uses a PI-L on 160+80m..but that’s so a smaller load cap can be used.
My ants all exhibit sky high swr on their harmonics..including the 3rd...so whats the problem ? Me, I could care less about harmonic suppression since the amp kills most of it..and the ants kill the rest. My F12 40m yagi barely resonates just a bit below the
12m band...and not at all on 15m. Optibeam uses linear decoupling stubs on their 40m yagis so they wont resonate on 15m. I enter a Q of 8-10 on the GM3SEK spreadsheet for all my hb amps. 30-36 db of 2nd harmonic suppression
is plenty imo..... from any amp. With 1 kw out....and 36 db down.... that means 1/4 watt on the 2nd harmonic. .25 watt into a sky high swr isnt gonna bother anybody anytime soon.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list