[Amps] 3-500Zs inverted
Vic Rosenthal K2VCO
k2vco.vic at gmail.com
Thu Apr 3 16:38:50 EDT 2014
No problem, just readjust the neutralization.
On 4/3/2014 1:33 PM, Carl wrote:
Its only in balance at the equator
----- Original Message ----- From: "RMorris" [1]<robrk at nidhog.net>
To: "Carl" [2]<km1h at jeremy.mv.com>
Cc: "Pete Smith N4ZR" [3]<n4zr at contesting.com>; [4]<Amps at contesting.com>
Sent: Thursday, April 03, 2014 2:51 PM
Subject: Re: [Amps] 3-500Zs inverted
But if it is Down Under and upside down, the the Coriolis effect would
return to the normal pattern.
Sent from my iPad
On Apr 3, 2014, at 13:43, "Carl" [5]<km1h at jeremy.mv.com> wrote:
Thats only for Down Under.
----- Original Message ----- From: "RMorris" [6]<robrk at nidhog.net>
To: "Pete Smith N4ZR" [7]<n4zr at contesting.com>
Cc: [8]<Amps at contesting.com>
Sent: Thursday, April 03, 2014 1:32 PM
Subject: Re: [Amps] 3-500Zs inverted
Don't forget to change the rotation of the fan and switch to the other
sideband.....
Sent from my iPad
On Apr 3, 2014, at 9:19, Pete Smith N4ZR [9]<n4zr at contesting.com> wrote:
I need to trouble-shoot my QSK system, which is built into my SB-220. Will
it do any harm to apply filament and plate voltages, but no drive, to the
3-500Zs in the inverted position for a few minutes at a time?
--
73, Pete N4ZR
Check out the Reverse Beacon Network at
[10]http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
--
73,
Vic, K2VCO
Fresno CA
[11]http://www.qsl.net/k2vco/
References
1. mailto:robrk at nidhog.net
2. mailto:km1h at jeremy.mv.com
3. mailto:n4zr at contesting.com
4. mailto:Amps at contesting.com
5. mailto:km1h at jeremy.mv.com
6. mailto:robrk at nidhog.net
7. mailto:n4zr at contesting.com
8. mailto:Amps at contesting.com
9. mailto:n4zr at contesting.com
10. http://reversebeacon.net/
11. http://www.qsl.net/k2vco/
More information about the Amps
mailing list