[Amps] CISCO WS-CAC-2500W PSU a few questions

[Col. Paul E. Cater]

Good day Conrad,

you may have already found this and it didn't help.  However, here is a ton
of information on the supply I didn't dig through.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Chassis_Installation/Cat6500/6500_ins/6500IGIX.html

Paul
WD8OSU



On Sun, Feb 16, 2014 at 8:41 AM, Conrad Farlow <conrad at g0ruz.com> wrote:

> Has anyone got a connection diagram for the CISCO WS-CAC-2500W which is a
> PSU for the Catalyst 6500 Series switches. I would like to use 2 for my
> SSPA's in the shack.
>
> They are 42V so I'd like to know if this can adjusted (pretty sure it will
> be possible) and also the details of the rear connectors.
>
> Regards
>
> Conrad G0RUZ
>
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>