[Amps] Clipperton L meter

[k4pdm]

It is staying pinned to the right with power turned off.


Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone

<div>-------- Original message --------</div><div>From: Louis Parascondola <gudguyham at aol.com> </div><div>Date:02/16/2014  9:43 AM  (GMT-05:00) </div><div>To: k4pdm at yahoo.com </div><div>Subject: Re: [Amps] Clipperton L meter </div><div>
</div>Maybe you didn't zap it.  Remove everything off the 2 terminals of the meter so the meter is by itslef, check it with an ohm meter and see if the meter responds.  If it does the meter should still be good.  They check the diodes across it.  Separate them and check each one, one might be shorted.  Check for opens in any of the 1 meg meter series resistors in the HV string.  Report back with findings.


-----Original Message-----
From: k4pdm <k4pdm at yahoo.com>
To: amps <amps at contesting.com>
Sent: Sun, Feb 16, 2014 9:28 am
Subject: [Amps] Clipperton L meter

I have apparently zapped my clipperton L meter by shorting the high voltage. Is 
 there any option for a replacement?

 Thanks 73 Paul K4PDM


Sent via the Samsung Galaxy Note® II, an AT&T 4G LTE smartphone
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps