[Amps] Building an Amp 101

[Bill Turner]

It might handle the current but the spacing is too small for a proper 
voltage rating. It should be about four inches in diameter and if bought 
new should cost between $300-$400. Check out these: 
http://multi-tech-industries.com/rswitches.html
The model 86 is the minimum you should use and the model 88 is optimum 
for your power level.

73, Bill W6WRT



On 1/17/2014 9:54 PM, Vic Rosenthal wrote:
> What exactly is wrong with it?
> On 1/17/2014 3:54 PM, Bill wrote:
> > Similar comments on the bandswitch.