[Amps] Tube swap

[William Turner]

I wouldn't say it has "trouble". It is quite accurate, but only at it's 
relatively low frequency. For higher frequencies or for measuring the 
inductance of a resistor, you need an impedance analyzer ($$$).

73, Bill W6WRT


------------ ORIGINAL MESSAGE ------------

On 1/29/2014 7:32 PM, Vic Rosenthal K2VCO wrote:
> It also has trouble with large tubing coils due to the distributed 
> capacitance. And it is not good for toroids on cores where the 
> permeability varies with frequency.