[Amps] RG6 Power Handling

[Carl]

Not very flexible.

Low power circuits can use RG-174 or 178.

Carl
KM1H


----- Original Message ----- 
From: "Larry Benko" <xxw0qe at comcast.net>
To: <amps at contesting.com>
Sent: Thursday, June 19, 2014 12:32 PM
Subject: Re: [Amps] RG6 Power Handling


> RG-142 (50 ohm)
>
> Same size as RG-58 and rated at 30MHz 1:1 SWR of 3.1KW average power
>
> Larry, W0QE
>
> On 6/19/2014 10:22 AM, Manfred Mornhinweg wrote:
>> Hi all,
>>
>> what 50Ω coax cable would be recommended for the internal wiring of a 
>> compact 160-10m legal limit amplifier? I'm looking for a cable thinner 
>> than RG-8, much more flexible, non-foam (to avoid de-centering in bends), 
>> and that can be purchased easily in small quantities. Of course, it must 
>> handle the power, even with a slightly elevated SWR, without overheating.
>>
>> Suggestions are welcome!
>>
>> Manfred
>>
>>
>> ========================
>> Visit my hobby homepage!
>> http://ludens.cl
>> ========================
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4592 / Virus Database: 3972/7706 - Release Date: 06/19/14
>