[Amps] Pi-L Network Question

[Vic Rosenthal K2VCO]

   Interesting. This one does have the HV.

   On 3/11/2014 1:00 PM, Louis Parascondola wrote:

     The Japanese model of the TL-922 does not go into the SSB Hi voltage mode.
      If you want more power out of it you need to go in and connect up the HI
     tap on the transformer.  I ran into this probolem and it was then I
     relaized it was a Jap  model.  Check tha out and see.  Maybe someone
     already did it.

It is a Japanese model -- you can set it up for 200-240 V but not 120, and 
> it came with 10 meters installed. I wonder if they are different in any 
> other way?

   -----Original Message-----
   From: Carl [1]<km1h at jeremy.mv.com>
   To: Vic Rosenthal [2]<k2vco.vic at gmail.com>; amps [3]<amps at contesting.com>
   Sent: Tue, Mar 11, 2014 1:23 pm
   Subject: Re: [Amps] Pi-L Network Question
All TL-922's are that way since the JA's did not have the low end of the
band when built. I started working them up around 1970 if I remember in the
80's.

Carl
KM1H




   --

   73,

   Vic, K2VCO

   Fresno CA

   [4]http://www.qsl.net/k2vco/

References

   1. mailto:km1h at jeremy.mv.com
   2. mailto:k2vco.vic at gmail.com
   3. mailto:amps at contesting.com
   4. http://www.qsl.net/k2vco/