[Amps] strip line design

[Saandy]

Absolutely!!!!
When connecting ANYTHING o a strip line you have 2 possibilities:
	1) connect to a point half a wavelength away from the tube and
reflect whatever impedance happens to be there to the tube.
	2) connect to a point a quarter wavelength from the tube, a high
impedance point. Whatever connects there doesn't show up at the tube end and
there's no disturbance from it.
	For years we've been using a half wavelength line that is relatively
easy to tune with the HV point connected at its middle point- the quarter
wavelength point- thus decoupled from the tube.
	It's not holy writ but it proved to be a viable and reasonable
solution.
Alex	4Z5KS


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com