[Amps] 1n5062 vs ?

[Carl]

The 1N5408 is pretty much the universal choice for the past 30+ years.

Carl
KM1H


----- Original Message ----- 
From: "N4ZED" <N4ZED at COMCAST.NET>
To: <amps at contesting.com>
Sent: Monday, May 26, 2014 6:06 AM
Subject: Re: [Amps] 1n5062 vs ?


> This link should work
>
> https://dl.dropboxusercontent.com/u/51086952/MLA-2500/MLA-2500%20PS%20Board%
> 20Repair%20(12).jpg
>
>
> -----Original Message-----
> From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of N4ZED
> Sent: Monday, May 26, 2014 3:09 AM
> To: amps at contesting.com
> Subject: [Amps] 1n5062 vs ?
>
> Due to a re-assembly error/oversight (Diode too close to neighboring wire,
> lesson re-learned) a diode and cap were damaged. I need to replace both.
>
> The question is do I keep with the 1N5062 diode or go with something more
> modern and replace them all?
> Suggestions on replacement P/N?
>
> https://www.dropbox.com/sh/13m1vyvftxadb3j/AADrWNE2INVEzlOvbdjcRU0Ba/MLA-250
> 0/MLA-2500%20PS%20Board%20Repair%20%2812%29.jpg
>
>
> Ken
> N4zed
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>