[Amps] Wanted: 3CX800a anode collet

[Ian White]

Replied off-list.

Thank you, Dan - and thank you, AMPS!


73 from Ian GM3SEK


>-----Original Message-----
>From: Dan Simmonds [mailto:dan at kk3an.com]
>Sent: 30 November 2014 20:33
>To: Ian White; amps at contesting.com
>Subject: Re: [Amps] Wanted: 3CX800a anode collet
>
>Ian, I have a box of about 30 of these soldered finger-stock collets
for
>the 800a7 that are new & silver-plated. I'm leaving for the west-coast
>US for a couple weeks on business, but I can post you a couple of these
>tomorrow (Monday) to your QRZ.com address if you like? They are yours
>for the taking.
>
>Dan KK3AN
>
>
>On 11/30/14 8:53 AM, Ian White wrote:
>> Please does anyone have a finger-stock collet to fit the anode of a
>> 3CX800A (2.5in diameter)? This is for 2m so I would prefer to make a
>> 360deg connection to a solid metal ring, rather than use a screw
clamp.
>>
>>
>> 73 from Ian GM3SEK
>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>