[Amps] HV Diodes

Carl km1h at jeremy.qozzy.com
Fri Oct 10 11:53:52 EDT 2014


For the same reason I dont need a 600hp car on the local streets.....I cant 
use that power.

If a 1500-2500W amp cant handle a 400A surge then the fuse better blow 
before the transformer.

The only place I use the 6A10 are on the Alpha 77SX conversion with the 
outboard transformer and a LK-800 conversion to 3CPX tubes and a 3200VDC 
under load transformer.

Carl
KM1H



----- Original Message ----- 
From: "Alek Petkovic" <vk6apk at bigpond.com>
To: <Amps at contesting.com>
Sent: Friday, October 10, 2014 8:00 AM
Subject: Re: [Amps] HV Diodes


> Why not go all the way and use the 10A10 diodes?
>
> 10 Amps at 1kV, in what looks to be the same size as the 6A10.
>
> 73, Alek
> VK6APK
>
>
> On 10/10/2014 1:51 PM, Bill Turner wrote:
>> ------------ ORIGINAL MESSAGE ------------(may be snipped)
>>
>> On Thu, 9 Oct 2014 13:46:29 -0700, Jim wrote:
>>
>>
>>> 1N5408 diodes, mounted on perf-board, works fine.
>>>
>> REPLY:
>>
>> 1N5408's are OK, but for essentially the same price 6A10's have a much
>> higher forward current and surge current rating. I use them for
>> everything. Be sure you get the 1000 PIV version - they also come in a
>> 100 PIV version. Mouser carries them.
>>
>> 73, Bill W6WRT
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>
> -- 
> From Sunny Binningup
>
>
> ---
> This email is free from viruses and malware because avast! Antivirus 
> protection is active.
> http://www.avast.com
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4765 / Virus Database: 4040/8359 - Release Date: 10/10/14
> 



More information about the Amps mailing list