[Amps] Source for replacement PS caps

[Alek Petkovic]

K4POZ sells 390uF/450V/105°C capacitors at $2.75 each plus shipping. 
They are not screw terminal jobs but that shouldn't matter.

See http://swap.qth.com/c_amphf.php and scroll down the ads to get to 
his ad.. He renews it quite often.

73, Alek. VK6APK

On 11/10/2014 1:42 AM, Steve NR4M wrote:
> Hello all,
>
> Figured it was time to re-cap the PS for my Ten-Tec since they are 
> about 25 years old.  The amp hasn't been used in a while so you just 
> know what will happen if I DON'T re-cap it before I use it.
>
> I really don't want to change (mechanically) the way the originals are 
> mounted in order to use a different, possibly more available, cap.
>
> Looking for suggestions on sources other than the 'usual' (Digikey, 
> Mouser, etc...)
>
> These caps are 400 MFD x 450 VDC, 85 degree, with screw terminals on 
> top.  Terminals appear to be #10, with a 1/2 inch spacing.  Dia is 1 
> 3/8 inch and length is 5 5/8 inches, or so.
>
> 100 degree would be nice and the capacity can be +/-.
>
> Any input would be helpful.  I just don't want to pay $25 per cap if I 
> can find similar for $15.
>

-- 
 From Sunny Binningup


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com