[Amps] Amps Digest, Vol 156, Issue 9

[Steve Wright]

who cares?  Buy another one!


On 19/12/15 06:00, amps-request at contesting.com wrote:
> Send Amps mailing list submissions to
> 	amps at contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.contesting.com/mailman/listinfo/amps
> or, via email, send a message with subject or body 'help' to
> 	amps-request at contesting.com
>
> You can reach the person managing the list at
> 	amps-owner at contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Amps digest..."
>
>
> Today's Topics:
>
>     1. More on "baby ur radio" (Charles H)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 18 Dec 2015 00:59:04 +0000
> From: Charles H <k4vud at hotmail.com>
> To: Contest Internet <cq-contest at contesting.com>,
> 	"amps at contesting.com"	<amps at contesting.com>, "k4vud at hotmail.com"
> 	<k4vud at hotmail.com>
> Subject: [Amps] More on "baby ur radio"
> Message-ID: <BLU182-W53700D59D2F5D9EA58F864F7E10 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> On this reflector, I have poo-pooed the idea of baby-ing your radio especially by turning it off often, lowering xmit power, etc.
> However, I read that with ordinary tubes, the chemistry of the cathodes and filaments are affected by life-of-use, so that tubes do "wear out" with use.  Tubes can be rated in terms of "hours of use" with the type in a KWM-2 rated at around 2,000 hours of useful function.  Thorium in the chemical make-up of the metal parts in a tube, maybe a metal or ceramic tube (usually added to higher power tubes) can extend tube life to about 100,000 hours.
>
> The conclusion is that "hours of use" of course do matter for hams intending to use their tube-type radios for thousands of hours.  The hours of use can be limited by simply turning the tube off when having only stand-by function.  However, there is some suggestion in the literature indicating that every "turn on" of a tube (or an incandescent light bulb) involves rapid heating of the elements inside which could, immediately or over time, deform elements and causing sudden failure (given that the metal elements do heat unevenly--due to resistance in the metal--if only for a very short duration of time).  Repetition of on-and-off cycles are thus a factor in lower tube life.
>
> Other than these factors, it appears in the literature that operating a tube, particularly high power transmitting tubes, at its rated values can extend life IF it is otherwise not sometimes operated below or above its ratings.  It appears that, for example, driving an RF amplifying tube at its full rated power does not materially decrease its life.   Reducing drive appears not to extend such tubes' life.
>
> It is all a balancing act.  73, Charly
>
> P.S., next question is "do transistors 'wear out'?"
>   		 	   		
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> ------------------------------
>
> End of Amps Digest, Vol 156, Issue 9
> ************************************