[Amps] Input SWR revisited

[Jim W7RY]

Not true Gary.

And we are not talking about using a tuner between the solid state exciter 
and the amplifier.

73
Jim W7RY


-----Original Message----- 
From: Gary Schafer
Sent: Wednesday, January 14, 2015 11:57 AM
To: donroden at hiwaay.net ; amps at contesting.com
Subject: Re: [Amps] Input SWR revisited

It means that-- if you are looking at the SWR at your radio and there is a
tuner after the SWR bridge, any changes in cable length after the tuner will
show a change in SWR at the radio if you do not touch the tuners tuning.
This assumes that the load on the end of the cable is not 1:1.

2nd, the SWR will always remain the same at the radio no matter what length
of cable is used (except or cable loss) or what the load impedance is as
long as that load impedance remains the same.

73
Gary  K4FMX

> -----Original Message-----
> From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of
> donroden at hiwaay.net
> Sent: Tuesday, January 13, 2015 2:01 PM
> To: amps at contesting.com
> Subject: Re: [Amps] Input SWR revisited
>
> Clear as Mud .........
> What does it all mean ???
>
> Don W4DNR
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps