[Amps] 5 Minutes for Ameritron 811H to warm up?

[Steven Katz]

If that's the case, it would need to be a really bad switch since only 1 mA passes through it and the meter.  More likely a multiplier resistor that drifted high.

-WB2WIK

-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of qrv at kd4e.com
Sent: Friday, January 23, 2015 3:48 PM
To: Amplifier Mailing List
Subject: Re: [Amps] 5 Minutes for Ameritron 811H to warm up?

The seller just wrote this:

"I think the problem is in the meter circuit. Even when the meter shows just 800 volt the amp does 600 watts. We were checking it out today and I don't think it needs caps, it might just be the multimeter switch is dirty or bad."


-- 

*David*
~KD4E~
Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22 _______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps