[Amps] Vendor For Transformer Rewind

[Martin A Flynn]

Vic
240 is the original operating voltage.   Considering the cost of the 
tube, I don't want to starve the filaments by operating at the lower 
voltage.

Is there anywhere in the US that still  has  120/240 volt power?

73,  Martin
W2RWJ

On 1/24/2015 11:31 AM, Vic Rosenthal wrote:
> But he should have them add a tap for 240, too.
>
> Vic K2VCO /4X6GP
>
>> On Jan 24, 2015, at 5:56 PM, Jim W7RY <w7ry at centurytel.net> wrote:
>>
>> Agreed!
>> 73
>> Jim W7RY
>>
>>
>> -----Original Message----- From: Paul Kraemer Sent: Saturday, January 24, 2015 7:06 AM To: maflynn at theflynn.org ; amps at contesting.com Subject: Re: [Amps] Vendor For Transformer Rewind
>> Martin
>> My vote goes hands down to the folks at Heyboer
>> Paul K0UYA
>>
>> -----Original Message----- From: Martin A Flynn Sent: Saturday, January 24, 2015 8:51 AM To: amps at contesting.com Subject: [Amps] Vendor For Transformer Rewind
>> A while back I had picked up a Henry 3002A amplifier with a shorted transformer.   I am interested in locating a vendor to re-wind the original (or supply a replacement) that will not require butchering the chassis, along with adding taps on the primary for 208 and 220 (club station is 208, house is 220)
>>
>> 73 W2RWJ
>> Martin
>>