[Amps] 833A GG

[Hsu]

Yes  I just downloaded the 833A's datasheet, Yes the plate to filament 
capacitance is 8.5P!
too much!Yes, I see, It is a challenge  to use it built an amplifier.
   Thanks Bill!
     Hsu

-----原始邮件----- 
From: Fuqua, Bill L
Sent: Monday, January 26, 2015 3:38 PM
To: Hsu ; amps at contesting.com
Subject: RE: [Amps] 833A GG

Oddly enough, the 833A has a greater plate to cathode capacitance than plate 
to grid.
The grid does not offer much shielding between the plate and cathode. You 
would probably have
to neutralize it no matter how you use it, common grid or cathode.  It is 
the only triode tube that
I know of that is like this.
  I thought it was odd and did not believe the specifications myself and 
measured the interelectrode
capacitance and my measurements agreed with the specifications.
  Probably best to use it common cathode and plate neutralization.
73
Bill wa4lav

________________________________________
From: Amps [amps-bounces at contesting.com] on behalf of Hsu 
[hsu4qro at gmail.com]
Sent: Monday, January 26, 2015 1:13 AM
To: amps at contesting.com
Subject: [Amps] 833A  GG

Anyone have  experience  about 833 works on GG configurtion?Is it can work
10 mtrs?I just contact with the manufacturer, the factory new tube
graphite anode,only $50/ea, ,dirt cheap
    Hsu

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps