[Amps] SPE 1.3K-FA and FTDX-5KMP

[Leigh Turner]

Charly, sadly there's an over-hyped obsession out there about Tx purity and
associated IMD specs for ham rigs....

Having said that many current SS amp offerings are poor performers in this
regard when driven to their rated PEP output :-(

Leigh
VK5KLT

-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Charles H
Sent: Friday, 13 November 2015 10:58 AM
To: Richard Solomon; amps at contesting.com
Subject: Re: [Amps] SPE 1.3K-FA and FTDX-5KMP

I do not know anything except that when I ran my Yaesu FT-1000MP Mark 5 at
40 watts to drive my tube amplifier in Class A, I burned up that radio so
well that two other very smart men could not fix it, including Yaesu London.

That orange button is not something to be touched.    73, Charly

P.S., the defenders will arrive on schedule, but I say, why risk it?   The
Elecraft Lovers Club started this hurrange about transmitter purity.  In
fact I read the very first message of what has spread like psoriasis where a
ham demanded in one post that anyone not running a K3 should have their
contest scores reduced.  No kidding. 



> Date: Thu, 12 Nov 2015 12:23:46 -0700
> From: dickw1ksz at gmail.com
> To: Amps at contesting.com
> Subject: [Amps] SPE 1.3K-FA and FTDX-5KMP
> 
> What would folks think about running the FTDX-5KMP
> in Class A to drive the SPE Amp ?
> 
> 73, Dick, W1KSZ
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps