[Amps] WTB: 10 Volt AC - 140 Amp Filament Transformer
Mike Feher
n4fs at eozinc.com
Mon Sep 14 00:08:29 EDT 2015
I have 4 or 5, 20 or so volt at about 80 amp with 115 primary transformers.
Maybe two of them with the primaries in series and the secondaries in
parallel would work. Anyway it is moot as they weigh a ton and I am far from
you. 73 - Mike
Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960
-----Original Message-----
From: Amps [mailto:amps-bounces at contesting.com] On Behalf Of Danny Ray Boyer
Sent: Sunday, September 13, 2015 7:46 PM
To: amps at contesting.com
Subject: [Amps] WTB: 10 Volt AC - 140 Amp Filament Transformer
I am looking for a used 10 Volt AC Filament Transformer with a minimum of
140 amp capacity.
Either single phase or 3 phase primary is acceptable.
Danny Ray Boyer W5AHN
drboyer at centralcom com
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6086 / Virus Database: 4419/10634 - Release Date: 09/13/15
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list