[Amps] SB220 on 120V
Roger (K8RI)
k8ri at rogerhalstead.com
Wed Apr 6 01:10:43 EDT 2016
10A is pushing your luck. That's 1200 Watts total on that circuit and
the wire for a 10A circuit will give plenty of voltage drop under load.
All my 120 VAC circuits are either 15A, or 30A with appropriate size
wire. The 30A circuit feed a 3 KVA true sine wave line conditioner/UPS.
The last power interruption dropped the computers on the regular UPS,
but those on the line conditioner didn't even blink.
If you are in rental property, another line would be a problem, but a !)
circuit feeding only an SB220 will likely be a problem too.
73
Roger (K8RI)
On 4/3/2016 Sunday 9:05 PM, Dick NY1E wrote:
> Hello list, I've had an SB220 in the past and am looking for another one, but I will have to run it on 120 volts, How does the 10A breaker handle the change? I've never heard of anyone changing the breaker...de Dick NY1E
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the Amps
mailing list