[Amps] HIGH FILAMENT VOLTAGE

[Mike Waters]

No need to use #12. Smaller wire = more compact. A shorter piece of #16 (or
maybe even #18), would do fine.

Depends on the current.

73, Mike
www.w0btu.com

On Sat, Dec 10, 2016 at 5:58 PM, kenneth Johnson <wa6rtp at hotmail.com> wrote:

> I used # 12 wire …total of 24 inches long  wound in a two inch coil placed
> in each filament lead .
> this  droped  the voltage on my henry 2k-3  filaments into specifation.
> your problem is finding enough room to get the coil in there.  at any rate
> …a length of wire is the way to go.
>
>