[Amps] Alpha 9500 Idling Current

[BRADLEY FOCKEN]

Hello all.
The plate current should be set to 150ma with no rf plus or minus 10ma. 150 is your target bias.
83 Brad K0HM



Sent from my Verizon 4G LTE smartphone


-------- Original message --------
From: Bill Turner <dezrat at outlook.com>
Date: 12/29/16 2:23 PM (GMT-07:00)
To: Amps group <amps at contesting.com>
Subject: Re: [Amps] Alpha 9500 Idling Current

------------ ORIGINAL MESSAGE ------------(may be snipped)

On Thu, 29 Dec 2016 13:35:12 -0500, Paul wrote:

>
>That amount of Ip idle current seems high to me for the 9500.  Possibly
>W6WRT and W8ZR can weigh-in with their findings.  Possibly, it was set
>higher in software?

REPLY:

My 9500 idles at 76 mA with 3620 VDC on the plate.

It was built in October 2014 but since I am the second owner I don't
know if the tube is still the original or not. Most likely it is.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps