[Amps] Amps] SB-220 update & gettering

[John Lyles]

Rob
Attached is a very authoritative paper from RCAm in AIEE in 1935, 
although very old, the designs have not changed much. The technology 
hasn't changed much since then. Most modern Tantalum or Moly plates do 
run with a lot of color in their typical full power state, but no so 
true with graphite. It is mechanically very stable comparatively, 
although it requires a lot of vacuum processing before it is very useful.

Some of the anode materials do function as a getter to desorb other 
stray ions when heated. Graphite is not one of them, although it 
certainly does outgass residual molecules if it is running hotter.
73
John L.
K5PRO

On 11/26/16 10:34 AM, Rob Atkinson wrote:
> I disagree.  The internal graphite anode tubes must have color to
> de-gas and stay gettered.
>
> 73
> Rob
> K5UJ