[Amps] Answer about heat failure

[Riichard Neuman]

 While in fact true,  recent case studys have found that EHFAS (Excessive Heat Failure Anxiety Syndrome) have been found treatable in more than 50% of reported cases by installing a higher GPM water circulation pump in the patient's "less-headroom" amplifier.

Richard  K3IPK

 

 

-----Original Message-----
From: Charles Harpole <hs0zcw at gmail.com>
To: amps <amps at contesting.com>
Sent: Sun, Oct 16, 2016 12:21 pm
Subject: [Amps] Answer about heat failure

The answer is TRUE.All failures of ham radios are caused, ultimately, by heat.Other suggestions......-vibration, which causes some component to break which cause othercomponents in the circuit to over-heat and fail.-component defect, or component just not installed causes surroundingcomponents to over-heat and fail.-operator mistakes which over-heat mis-adjusted circuits.and finally,-UPS-caused failures remain a mystery but customer anger is large source ofheat.Thanks to all who answered or just laughed.  But, don't make me ask "whatmakes a tube soft?"​73, signed in spirit of fun,​Charly, HS0ZCW_______________________________________________Amps mailing listAmps at contesting.comhttp://lists.contesting.com/mailman/listinfo/amps