[Amps] Chimney for GS35B

[TexasRF at aol.com]

Mike, chimneys can be homebrewed with Teflon sheet and small screws to form 
 a cylinder. Works well at 432 MHz so it will work at HF as well.
 
73,
Gerald K5GW
 
 
 
In a message dated 10/28/2016 1:45:26 P.M. Central Daylight Time,  
k4gmh at arrl.net writes:

Hello,

Need a couple of teflon chimneys for a pair of GS35B  amps.  Suggestions on
where I can get them?

Presently using  PVC, but have had not good results in the long run with
these type of  chimneys especially since I do a lot of RTTY contesting.

73,
Mike,  K4GMH
_______________________________________________
Amps mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps